When pushed with a finger, the display panel moves slightly and makes a
noise
●
There is a little gap around the panel to prevent damage to the panel. This
is not a malfunction.
How to operate the TV with Standby On / Off switch on this unit
(For models without the control buttons)
●
Perform the following procedure to operate the TV such as selecting a
channel, changing volume, etc.
1. Press Standby On / Off switch on this unit.
●
The operation guide is displayed.
●
When you press and hold Standby On / Off switch on this unit, the
message is displayed and TV turns off in several seconds.
2. Press Standby On / Off switch to select an item while the operation guide
is displayed.
●
The displayed item switches each time the button is pressed. Follow
the on-screen instructions.
3. Press Standby On / Off switch for approx. 2 seconds.
●
The selected operation is executed.
●
For the input selection screen, press Standby On / Off switch to select
an input and press Standby On / Off switch for approx. 2 seconds to
switch the input mode.
- 366 -
To Next Page
Loading...
