HDMI HDR Setting
1. Display the menu with MENU, select Main Menu and press OK to access.
2. Select Setup > HDMI HDR Setting and press OK to access.
3. Set the item and press OK to store.
HDR Setting
(Dynamic / Static / Off)
Set to Dynamic or Static when the HDR device is connected to the TV.
●
Please turn Off this function if the image looks unnatural. This may occur
in some cases such as compatibility with the connected device, source
images or with use of multi-window function.
●
Image may disappear for a few seconds when the setting is changed.
●
For HDMI
HDR Dynamic Setting
HDR10+ Functionality
(On / Off)
Enables the HDR10+ function for HDMI input signal.
Dolby Vision
(On / Off)
On:
Allows Dolby Vision processing to occur either on the TV or the source
device mainly.
Off:
Disables Dolby Vision functionality.
= Note =
●
Supporting HDR does not increase the peak brightness capabilities of the
TV panel.
- 76 -
To Next Page
Loading...
