Panasonic TX-48MZ980B

Noise reduction settings
1. Display the menu with MENU, select Main Menu and press OK to access.
2. Select Picture > Noise Reduction / MPEG Remaster and press OK to
access.
3. Set the item and press OK to store.
Noise Reduction
(Auto / Max / Mid / Min / Off)
Reduces unwanted picture noise.
●
Not valid in the following conditions:
– 1080p Pure Direct is set to On.
– 4K Pure Direct is set to On.
– 4K 120Hz Bypass Mode is set to On.
MPEG Remaster
(Auto / Max / Mid / Min / Off)
Reduces flicker noise in contoured parts of a picture and block noise.
●
Not valid in the following conditions:
– 1080p Pure Direct is set to On.
– 4K Pure Direct is set to On.
– 4K 120Hz Bypass Mode is set to On.
- 91 -