EasyManua.ls Logo

Panasonic TX-50AX802B - Sound

Panasonic TX-50AX802B
271 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 259 -
No programmes shown on TV Guide
●
Adjust the direction of the aerial to another transmitter installed nearby.
●
Check the analogue broadcast. If the image quality is poor, check the
aerial and consult your local dealer.
●
Check the analogue broadcast (if still available in your area).
Sound
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
No sound is produced
●
Is “Sound mute” active? Press MUTE to switch sound mute on or off.
●
Is the volume set to the minimum?
●
Check connections and setting of external equipment.
Watching > External equipment
●
Ensure that Speaker Selection is set to TV.
Functions > VIERA Link “HDAVI Control™” > Speaker Selection
●
Ensure that Speaker Setting is set to TV Speaker.
Watching > For best audio > Volume settings
Sound level is low or sound is distorted
●
Sound signal reception may be poor.
●
Set NICAM in the Sound Menu to Off. (Analogue)
Watching > For best audio > Advanced settings

Table of Contents