- 30 -
= Note =
●
Subtitles may not be displayed properly in 3D images.
●
If you press STTL in Analogue, the TV switches to teletext service and
calls up a favourite page. Press EXIT to return to TV mode.
●
This is the same as switching to analogue teletext service and selecting
“P888” (subtitle service).
Watching > Teletext > Viewing Teletext
●
Not valid on the sub screen in multi window mode
Last view
Switch to a previously viewed channel or input mode easily with last view
button.
●
Press again to return to the current view.
= Note =
●
Switching channel may not be available depending on the condition.
●
Watching less than 10 seconds is not reflected in the previously viewed
channel or input mode.
Off Timer
Turn the TV Standby mode automatically after a fixed period.
1. Display the menu with MENU.
2. Select Timer > Off Timer with
/ and press OK to access.
3. Select the time in 15-minute increments with
/ and press OK to set.
90 / 75 / 60 / 45 / 30 / 15 / Off (minutes)
●
To cancel, set to Off or turn the TV off.
●
The remaining time displays on the information banner.
Watching > Basic > Information banner
●
When the remaining time is less than 3 minutes, the remaining time will
flash on the screen.