Panasonic TX-P46GT30E

Need help?

Do you have a question about the Panasonic TX-P46GT30E and is the answer not in the manual?

Summary

Safety Precautions

General Safety Guidelines

General guidelines for safe repair and servicing of the equipment.

Touch Current Leakage Check

Procedure and limits for checking leakage current to prevent shock hazards.

Warnings

Electrostatic Discharge (ESD) Prevention

Techniques to prevent component damage from static electricity.

Technical Specifications

Technical Descriptions

KEY Specifications for CI Plus, DTCP-IP, WIDEVINE

USB HDD Recording Functionality

Service Mode Operations

Entering and Navigating Service Mode

Purpose and key commands for entering and navigating Service Mode.

Service Mode Adjustment Parameters

Data Copy using SD Card

SD Card Data Copy Purpose

TV to SD Card Data Copy Process

SD Card to TV Data Copy Process

Troubleshooting Guide

IIC Bus Line Check

How to access the self-check function for IIC bus lines.

Power LED Blinking Chart

No Power Troubleshooting

No Picture Troubleshooting

Service Fixtures and Tools

SC Jig Usage

Purpose and usage of the SC jig for diagnosing SC or SU/SD board failures.

Removing the C2-Board

Plasma Panel Replacement

Cautionary notes and steps for replacing the plasma panel.

Measurements and Adjustments

Adjustment Procedures

Introduces measurement and adjustment procedures.

Vsus Selection Adjustment

Procedure for setting Vsus to LOW after panel or A-board replacement.

Sub-Contrast Adjustment

THX White Balance Adjustment

Block Diagrams

Main Block Diagram Overview

Main block diagram showing interconnections between major components.

Block Diagram (1 of 4)

Part 1 of block diagram, detailing AV input and power supply connections.

Block Diagram (2 of 4)

Part 2 of block diagram, focusing on scan drives and side units.

Block Diagram (3 of 4)

Block Diagram (4 of 4)

Component Parts List

Accessory and Assembly Parts List