- 186 -
■ Insert the CI module (optional)
●
The features that appear on screen are dependent on the contents of the
selected CI module.
●
Normally encrypted channels will appear. Follow the on-screen
instructions. If encrypted channels do not appear, take the following steps.
●
For more details, read the manual of the CI module, or check with the
broadcaster.
1. Display the TV Selection screen with TV
2. Select the mode with
/ and press OK to set
DVB-C / DVB-T
3. Display the menu with MENU
4. Select Setup
Common Interface with / and press OK to access
5. Select Slot 1: / Slot 2: with
/ , press OK and follow the on-screen
instructions
●
On-screen instructions may not correspond to the remote control buttons.
To Next Page
Loading...
