Panasonic TX-PR50VT60 - New Channel Message; Signal Condition

- 77 -
New Channel Message
Selects whether to give a notification message when a new DVB channel is
found or not.
●
When a notification message appears, you can perform Update Channel
List pressing OK.
Signal Condition
Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for DVB
reception.
●
Use the Signal Quality indicator as follows.
– Green bar: Good
– Yellow bar: Poor
– Red bar: Bad (Check the terrestrial aerial, cable or satellite dish)
●
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
For DVB mode