Panasonic TX-W32D4F - English; Colour Television

Colour Television
TX-W32D4F
TX-W28D4F
EURO - 5 Chassis
SPECIFICATIONS
(Information in brackets { } refer to TX-W28D4F)
Power Source: 220-240V AC, 50Hz
Power Consumption: 145W {135W}
Aerial Impedance: 75
Ω
unbalanced, Coaxial Type
Standby Power 1,9W
Consumption:
Receiving System: PAL-I, B/G, H, D/K, PAL-525/60
SECAM L/L’, B/G, D/K
M.NTSC
NTSC (AV only)
Receiving Channels:
VHF E2-E12 VHF H1-H2 (ITALY)
VHF A-H (ITALY) VHF R1-R2
VHF R3-R5 VHF R6-R12
UHF E21-E69 CATV (S01-S05)
CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10)
CATV S21-S41 (HYPERBAND)
Intermediate Frequency:
Video 38,9MHz, 34MHz
Sound 32,9MHz, 33,4MHz, 33,16MHz
32,4MHz, 40,4MHz, 33,05MHz
32,66MHz
Colour 34,47MHz (PAL)
34,5MHz, 34,65MHz (SECAM)
Video/Audio Terminals:
AUDIO MONITOR OUT Audio (RCAx2) 500mV rms1k
Ω
AV1 IN Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 10k
Ω
RGB (21 pin)
AV1 OUT V ideo (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 1k
Ω
AV2 IN Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 10k
Ω
S-Video IN Y: 1V p-p 75
Ω
(21 pin) C: 0,3V p-p 75
Ω
AV2 OUT Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 1k
Ω
Selectable Output (21 pin)
AV3 IN S-Video IN Y: 1V p-p 75
Ω
(4-pin) C: 0,3V p-p 75
Ω
Audio (RCAx2) 500mV rms10k
Ω
Video (RCAx1) 1V p-p 75
Ω
AV4 IN Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 10k
Ω
S-Video IN Y: 1V p-p 75
Ω
(21 pin) C: 0,3V p-p 75
Ω
AV4 OUT Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 1k
Ω
High Voltage: 31kV
±
1kV {30,5kV
±
1kV}
Picture Tube: W76LFC185X05 {W66EHK51X81}
Audio Output: 2 x 20W Left/Right
(Music Power) 8
Ω
Impedance
Headphones: 8
Ω
Impedance
Accessories supplied: Remote Control
2 x R6 (UM3) Batteries
Dimensions:
Height: 555mm {497mm}
Width: 862mm {760mm}
Depth: 553mm {518mm}
Net Weight: 47,5kg {36,5kg}
Specifications are subject to change without notice.
Weights and dimensions shown are approximate.
NOTE: This Service Manual should be used in conjunction with the
EURO-5 technical guide.
CARACTÉRISTIQUES
(Les informations entre parenthèses { } concernent le TX-W28D4F)
Alimentation: 220-240V AC, 50Hz
Consommation: 145W {135W}
Impédance d'antenne: 75
Ω
asymétrique sur prise coaxiale
Standby 1,9W
Consommation:
Systéme de réception: PAL-I, B/G, H, D/K, PAL-525/60
SECAM L/L', B/G, D/K
M.NTSC
NTSC (Entrée AV seulement)
Canaux de réception:
VHF E2-E12 VHF H1-H2 (ITALY)
VHF A-H (ITALY) VHF R1-R2
VHF R3-R5 VHF R6-R12
UHF E21-E69 CATV (S01-S05)
CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10)
CATV S21-S41 (HYPERBAND)
Fréquency Intermédiaire:
Video 38,9MHz, 34MHz
Sound 32,9MHz, 33,4MHz, 33,16MHz
32,4MHz, 40,4MHz, 33,05MHz
32,66MHz
Couleur 34,47MHz (PAL)
34,5MHz, 34,65MHz (SECAM)
Les bornes vidéo/audio:
SORTIE AUDIO MONITOR Audio (RCAx2) 500mV rms1k
Ω
Entrée AV1 (21 brioches) Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 10k
Ω
RGB (21 pin)
Sorties AV1 (21 brioches) Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 1k
Ω
Entrée AV2 (21 brioches) Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 10k
Ω
S-Video IN Y: 1V p-p 75
Ω
(21-pin) C: 0,3V p-p 75
Ω
Sorties AV2 (21 brioches) Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 1k
Ω
Être sélectionnée
Entrée AV3 S-Video IN Y: 1V p-p 75
Ω
(4-pin) C: 0,3V p-p 75
Ω
Audio (RCAx2) 500mV rms10k
Ω
Video (RCAx1) 1V p-p 75
Ω
Entrée AV4 (21 brioches) Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 10k
Ω
S-Video IN Y: 1V p-p 75
Ω
(21-pin) C: 0,3V p-p 75
Ω
Sorties AV4 (21 brioches) Video (21 pin) 1V p-p 75
Ω
Audio (21 pin) 500mV rms 1k
Ω
Tension d’anode: 31kV
±
1kV {30,5kV
±
1kV}
Tube image: W76LFC185X05 {W66EHK51X81}
Sortie Audio: 2 x 20W Gauche/Droite
(Music Power) 8
Ω
Impédance
Casque d'écoute: 8
Ω
Impédance
Accessories fournis: Télécomande
R6 (UM3) x 2 Piles
Dimensions:
Hauteur: 555mm {497mm}
Largeur: 862mm {760mm}
Profondeur: 553mm {518mm}
Poids (NET): 47,5kg {36,5kg}
Les caractéristiques techniques sont susceptibles de modification sans
Préavis.
Le poids et les dimensions indiqués sont approximatifs.
ORDER No. SM-98079