- 30 -
■ Auto Standby
1. Display the menu with MENU.
2. Select Timer > Auto Standby with
/ and press OK to access.
3. Select On / Off with
/ and press OK to set.
Auto Standby
(On / Off)
Automatically turns the TV to Standby mode for energy saving when no
operation is performed for 4 hours.
●
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
●
The notification message will appear 3 minutes before going into Standby
mode.
■ No signal Power off
1. Display the menu with MENU.
2. Select Timer > No signal Power off with
/ and press OK to access.
3. Select On / Off with
/ and press OK to set.
No signal Power off
(On / Off)
Automatically turns the TV to Standby mode to prevent unnecessary power
consumption when no signal is received and no operation is performed for
10 minutes.
●
The notification message will appear 3 minutes before going into Standby
mode.
■ Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode.
The concerned items and their current settings are displayed. Select Set to
Eco to set them to the energy-saving settings at once.
1. Display the menu with MENU.
2. Select Setup > Eco Navigation with
/ and press OK to access.
3. Select Set to Eco with
/ and press OK to set.
●
Auto Standby and No signal Power off are active when Eco Navigation is
set to Set to Eco.
To Next Page
Loading...
