Assembling the Electronic Board
12
16
Wipe the screen film surface.
Soak a soft cloth with water, wring well, and
wipe the screen film surface.
• Do not wipe the screen film surface with paint
thinner, benzene, or cleaners that contain
abrasives. Doing so may cause discoloration.
• Do not wipe the screen film surface with a dry
cloth. Doing so may create static electricity.
17
Check operations.
Refer to “Electronic Board Operations Check”
on page 13.
Caution
UB-5325_IM_EN.book 12 ページ ２００８年１月８日 火曜日 午後５時７分
To Next Page
Loading...
