Panasonic VDR-D150EB - Page 97

4. Removal of Rear Case & EVF Ass'y
1) Disconnect the EVF F.P.C. and the Connector Cable
from Connector FP5 and P1.
2) Remove the 6 Screws (519).
P1
FP5
519
519
519
519
519
519
Fig. D4
5. Installation of Lens Ass'y
Take care not to damage the motor leads.
1) Install the Lens Ass'y with the 2 holes and 2 Screws
(519).
2) Connect the F.P.C.s to Connector FP301, FP701.
hole
hole
FP701
FP301
Lens Ass'y
519
519
Motor leads
Fig. D5
6. Removal of Main P.C.B. and Jack P.C.B.
1) Remove the 6 Screws (419, 519).
2) Disconnect the Zoom Switch F.P.C. from Connector
FP3.
3) Remove the Main P.C.B. and Jack P.C.B. to disconnect
Connector B1 (B to B Connector).
419
519
519
519
519
519
Main P.C.B.
& Jack P.C.B.
FP3
B1
Fig. D6
7. Removal of Disc Cover Lock Unit
1) Remove the 3 Screws (419, 533, 544)
2) Slide the Lock Lever to open the Disc Cover.
3) Disconnect the F.P.C. from Connector on the DVD
Drive Frame Unit.
4) Remove the Disc Cover Lock Unit. Take care not to
damage the 2 Switches.
Connector
Switch
Disc Cover Lock Unit
Lock Lever
Switch
Slide
544
533
419
Fig. D7