8. DVD Drive Frame Unit Caution
Optical pickup
CAUTION: VISIBLE LASER RADIATION DO NOT
STARE INTO THE BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS CLASS 2M
Laser light striking the eye may cause your eyesight
to be lost: For safety, be sure to remove any power
supply (AC adaptor/charger, battery, etc.) from the
DVD video camera/recorder before starting work.
Caution
<CSA requirement>
Fig. D8-1
Installation of DVD Drive Frame Unit
1) Position the DVD Drive Frame Unit correctly so that the
Zoom Switch F.P.C. is not pinned beneath it.
2) Tighten the 2 Screws (519).
Zoom
Switch
F.P.C.
DVD Drive Frame Unit
519519
Fig. D8-2
9. Installation of Jack P.C.B.
1) Connect the Connector B2 (B to B Connector).
2) Tighten Screw (519).
Jack P.C.B.
Main P.C.B.
519
B2
Fig. D9
10.Installation of Front P.C.B.
1) Install the LED Light Lens (For models with Light) into
the Front Case Unit.
2) Install the Front P.C.B. with 2 bosses of the LED Light
Lens and the 5 Screws (533).
boss (
For models with Light)
boss
(For models with Light)
LED Light Lens
(For models with Light)
Front Case Unit
533
533
533
533
533
Front P.C.B.
Fig. D10
To Next Page
Loading...
