Watching Videos and DVDs
If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen.
You can select the external equipment to access.
With the connected equipment turned On
Display the Input select menu
INPUT
• To return to TV
INPUT
(example)
or
Press the corresponding NUMBER
button on the remote control to
select the input of your choice.
Select the input of your choice,
then press OK.
@ During the selection, if no action
is taken for several seconds, the
"Input select" menu disappears.
Terminal @ The terminal and label of the
Label connected equipment are
displayed.
To label each of the inputs,
(example) please refer to p. 41.
@The input label will be displayed on the "Input select" screen if the Input label is set
on p. 41.
@ For side input terminals (HDMI 3/Video 2), "GAME" input label is set as default.
(Picture mode is set to "Game", refer to p. 47.)
@ For more details for the picture mode setting, refer to p. 47. For "Input labels", refer
to p. 41.
Operate the connected equipment using the remote
control supplied with the equipment
@ For details, see the manual for the connected equipment.
If you connect equipment that has the "HDAVI Control" function to the TV using an HDMI cable,
you will find it easier to use. Please refer to p. 30-35. Before using these functions, you need to
set "VIERA Link" setting to "On" as shown below.
_ Display the menu
Select "Setup"
/select
Select "VIERA Link settings"
/select
_) next
Select "VIERA Link"
• Press to exit from
a menu screen Select "On"
EXIT
(default is On)
• Press to return to
the previous screen
RETURN
@
Now you can set each "VIERA Link" function according to your preference
(p. 32-35).
@ If no HDMI equipment is connected or standard HDMI equipment (non- "VIERA
Link") is used, set it to "Off".
@ For more details on the external equipment's connections, please refer to the
operating manuals for the equipment.
@
o
:::3-
£C}
<
CD
O
0o
o_
EJ
<
24 25
To Next Page
Loading...
