How to Use Menu Functions
• Menu list
Menu Item' Adjustments/Configurations(alternatives)
Reset to defaults* Resets all picture adjustments to factory default settings except for "Advanced picture".
Picture mode Basic picture mode (VividlStandardlCinemalGamelCustom) (p. 47)
Back light Adjusts the luminance of the back light.
Adjusts color, brightness, etc. for each picture mode to suit your taste
Contrast, Brightness, _ Display range
Color, Tint, Sharpness Contrast/Brightness/Color/Sharpness:0 - 100
Tint: -50 - +50
Color temp. Selects a choice of Cool (blue), Normal, or Warm (red) color. (Cool/Normal/Warm)
Controls dark areas without affecting the black level or brightness in the overall picture
A.I. picture (Off/On)
C.A.T.S. Adjusts the brightness and gradation according to the ambient lighting condition. (Off/On)
Video NR Reduces noise, commonly called snow. Leave it off when receiving a strong signal. (Off/On)
Changes the format (aspect ratio). (FULLIH-FILLIJUSTI4:31ZOOM)
Screen format Lets you choose the aspect depending on the format of received signal. (p. 45)
Adjusts the horizonta! display range to reduce noise of both side edges of an image. (Size l/Size 2)
H size Size 2: Adjusts the image size according to the aspect mode for to reduce noise. (p. 48)
Zoom Adjusts vertical alignment and size when aspect setting is "ZOOM"
adjustments
PC adjustments Sets PC display (p. 26)
3D Y/C filter Minimizes noise and cross-color in the picture. (Off/On)
Selects image resolution of component-connected devices (SD/HD)
Color matrix _ SD: Standard Definition HD: High Definition
® Only used with 480p video signal.
MPEG NR Reduces noise of specific digital signals of DVD, STB, etc. (Off/On)
Black level Selects Dark or Light. Valid only for external input signals. (Dark/Light)
3:2 pulldown Adjusts the picture recorded in 24 fps for optimum quality. (Off/On/Auto)
Reset to defaults* Resets Bass, Treble, and Balance adjustments to factory default settings.
Bass Increases or decreases the bass response.
Treble Increases or decreases the treble response.
Balance Emphasizes the left / right speaker volume.
Surround Enhances audio response when listening to stereo. (Off/On)
Volume leveler Minimizes volume disparity after switching to external inputs.
Switches to "Off" when using external speakers (Off/On)
TV speakers ¢ "Surround" and "Volume leveler" do not work if "Off" is selected.
HDMI 1 in The default setting is "Digital" for the HDMI connection. (Digital input signal)
HDMI 2 in Select audio input terminal when DVI cable is connected. (Analog audio input signal)
HDMI 3 in (Digital/ComponentNideo l/Video 2)
Sleep, Timer 1-5 The TV can automatically turn On/Off at the designated date and time
Locks the channels and programs. (p. 36)
Closed caption Displays subtitles (Closed caption). (p. 40)
® In the AV mode, the Audio and Setup menus give fewer options.
* Confirmation screen is displayed. Select "Yes" and press OK to reset.
(Continued)
• Menu list
Menu Item Adjustments/Configurations (alternatives)
Sets the mode to select the channel with the Channel up/down button.
Channel surf mode All/Favorite/Digital only/Analog only)
Favorite: Only channels registered as FAVORITE. (p. 16)
Language Selects the screen menu language.
Clock Adjusts the clock. (p. 14)
ANT/Cable setup Sets channels. (p. 13)
Input labels Selects the terminal and label of the external equipment. (p. 41 )
Controls the equipment connected to HDMI terminals (Off/On) (p. 32)
VlERA Link ¢ "Power off link", "Power on link", "Energy saving mode", "Unselected device energy save"
and "Default speakers" cannot be selected if "Off" is set.
Power on link Sets "Power on link" of the HDMI connected equipment (No/Yes) (p. 32)
Power off link Sets "Power off link" of the HDMI connected equipment (No/yes) (p. 32)
Energy saving Sets "Energy saving mode" of the HDMI connected equipment. (Quick start/Save) (p. 32)
mode
Unselected
Sets "Unselected device energy save" of the HDMI connected equipment. (p. 32)
device energy (No (stay on)/yes (with prompt)/Yes (no prompt))
save
Default speakers Selects the default speakers (TV/Theater) (p. 32)
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark
Power save room. (Standard/Saving)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
Not in use when "Auto power on", "On/Off Timer" or "Lock" is set, or while "SD mode" or
No signal for 10 "Digital Channel" is selected.
minutes _ "No signal for 10 minutes was activated" will be displayed for about 10 seconds when
the TV is turned on for the first time after the power was turned off by "No signal for 10
minutes".
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
No activity for 3 _ Not in use when "Auto power on" or "On/Off Timer" is set, or while "PC input" is selected.
hours _ "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No activity for 3 hours".
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Turns TV On automatically when the cable box or a connected device is turned On (No/Yes)
TV AC cord must be plugged into this device. TV comes on every time the power is restored.
Auto power on _ The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set.
(p. 42)
Set "Thumbnail" or "Slideshow" to play back SD cards automatically.
Slideshow/Thumbnail/Set later/Off)
Restart first time setup from "Language" setting. (p. 12)
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings.
Image viewer
auto play
Firsttimesetup
About
Reset to defaults
• Sub menu list
Menu Item I Adjustments/Configurations (alternatives)
Sets the mode to select the channel with Channel up/down button.
Channel surf mode (All/Favorite/Digital only/Analog only)
Set favorite Sets favorite channels. (p. 16)
Edit CH caption Changes the station identifier. (p. 39)
Signal meter Checks the signal strength if interference or freezing occurs on a digital image.
@
,_,, -r"
'o o
_C
q_., 0o
28 29
To Next Page
Loading...
