• Other Useful operations
Entering characters
You
can use the remote control keys to enter the alphanumeric characters.
• Switches input mode
G
~
ABC
~abc~
123
• Press each number key
to cycle through the
alphanumeric character
~--·II-------------~
Navigation area
•
You
can also use a USB keyboard (not supplied) to enter the alphanumeric characters.
• Keyboard type (p. 55)
Password setting/entering
You
need to enter the password when you access locked channel or inputs.
•
~
.....
()
:::r
~
co
..,
<
~
If it is your first time entering the password, enter the password twice
in
order to register it.
• Make a note
of
your password. Do not forget it. (If you have forgotten
your password, consult your local dealer.)
• When you select a locked channel, a message will be displayed that
allows you to view the channel after you input your password.
,.
Change password (p. 54)
You
can operate non-character keys as remote control keys.
• Key chart
Kevboard kev
Remote key
Keyboard
key
Remote key
UP/DOWN/LEFT/RIGHT
Cursor
key
F4
Input
Enter
OK
F5
Channel Down(
-)
BackSpace
Return (when
you
do
not
F6
Channel up(+)
inout character)
0-9
0-9
F7
Volume Down(-)
F1
Menu
F8
Volume up(+)
F2
VIERA
Tools
F9(Red)/F10(Green)1 Color
key
F3
Submenu
F11
(Blue)/F12(Yellow)
(Red/BluelYellow/Green)
Input your 4-digit password
lhJ~~
~~~
~~IQ
~
• For more details on setting and operation
of
the USB keyboard, please also read the operating manuals for the USB
keyboard.
• Some keyboards do not have these keys.
21
To Next Page
Loading...
