Care and Cleaning
First, unplug the Power cord plug from the wall outlet.
Display panel
The front
of
the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-
free cloth.
• If the surface is particularly dirty, soak a soft, lint-free cloth
in
diluted mild liquid dish soap
(1
part mild liquid dish soap diluted
by 100 times the amount
of
water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface
of
the
display panel, then wipe it evenly with a dry cloth of the same type until the surface
is
dry.
• Do not scratch or hit the surface
of
the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile
substances such as insect sprays, solvents, and thinner; otherwise, the quality
of
the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
• If the cabinet
is
particularly dirty, soak the cloth
in
a weak mild liquid dish soap and then wring the cloth
dry.
Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.
e Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma
TV.
If water droplets get inside the unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality
of
the cabinet surface
may be adversely affected or the coating may peel off.
•
Do
not let articles made from rubber or PVC be
in
contact with the TV for long periods
of
time.
Pedestal
• Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small
amount
of
mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If
using a chemically-treated cloth, follow the instructions supplied with the cloth.)
..
Do not attach sticky tape or labels, as they can make the surface
of
the pedestal dirty. Do not allow long-term contact with
rubber, vinyl products, or the like. (Doing so will cause deterioration.)
3D Eyewear
• Clean using a soft, dry cloth.
• Wiping the
3D
Eyewear with a soft cloth that is covered
in
dust or dirt may scratch the eyewear. Shake off any dust from the
cloth before use.
•
Do
not use benzene, thinner, or wax on the
3D
Eyewear, as doing so may cause the paint to peel off.
• Do not submerge the
3D
Eyewear in liquid such as water when cleaning.
• Avoid storing the
3D
Eyewear
in
hot or highly humid locations.
• During the long period
of
disuse, full charge the
3D
Eyewear once every 6 months to keep the battery performance.
(
Note)
• As the liquid crystal shutters (lens) are fragile and easily broken, be very careful when cleaning them.
61
To Next Page
Loading...
