Wireless network (Wireless network setting)
Set only if specified by the provider. It
is
not required for normal household use.
•
C
(J)
:J
<0
Z
CD
~
o
....,
7'
(J)
CD
:<
@'
(J)
IIJ.~
~~~
~~~
~
•
Proxy
address
This is the address
of
the relay server that is connected
to the target server instead
of
the browser and sends
data to the browser. Setting is only required if specified
by the provider.
•
Proxy
port
This number is specified by the provider together with the
Proxy address.
1
...
IP_ad_dr_es_s
__
....I
• Manual
setting
CD
Select "IP/ONS setting mode" and set to "Manual"
® Select the item and press OK
@ Check the specifications of the broadband router and
enter each IP address.
Or Enter each IP address as was specified by the
provider
IP addre5slDNS settings
tPse:tttttOtI'IO<tit
IPadt1tMe
192.168.0.5
SubtlDttrl.Bfl
255.255.255.0
Qt,taultgatel/UlY 192.166,0.254
ONS
semng
mctde
Automatic
ON$
192.168.0.20
~
a4.drht.
19216805
$UbnttIt\flik
255
255 255 0
OIlfaultgat-away
'9216802~
l)fW6~tlJttt:m<HH
Automatic
ON&
192168020
•
]I
o
II
WPS
(Wi·Fi
Protected
Setup
using
push
bullon)
WPStWi.fiPtoteeted5elUp
using
PlNnumber)
Manual~~ings
Menu
Wireless
network
Please
choose
connection
method:
Search
for
Wireless
.rll~twotks
® Select item and press OK
Proxy setting
CD
Select
"Proxy
setting"
I
I
I I
• 1i
iI
The'acquired
~ddress
is displayed.
® Each IP
address
is
acquired
automatically
If you are using a broadband router,
IP
automatic
acquisition
in
OHCP can be used under normal
circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for
each device.
• When connecting by
11
n
(5
GHz), select "AES" as the
Encryption type for the wireless LAN.
IP
address/DNS settings
* Wi-Fi Protected Setup
is
an
easy setting of the Wi-Fi
Alliance's certification
• For more details on setting of
an
Access point, please
refer to operating manual for the Access point.
CD
Select "IP/ONS
setting
mode"
and
set
to
"
Automatic"
(When IPIONS automatic acquisition
in
OHCP can be
used)
• Sets I Changes
wireless
network
setting
CD
Press
"Wireless
network"
and
display
setting
screen
®
Follow
the
directions
on
screen
to
complete
the
setting
Search
for
Wireless
networks:
Select
an
access point from the ones searched for
automatically, and configure the settings as instructed
on
the screen.
WPS (Wi-Fi Protected Setup*
using
push
button):
You
can connect the Access point to press the
buttons.
WPS (Wi-Fi Protected Setup
using
PIN number):
Set the PIN code that is displayed
on
the TV
on
the
Access point.
Manual
settings:
Manually set SSIO, Security type, and Encryption type
to match the settings of the Access point to which
to
connect.
@
Enter
address
or
port
number
and press OK
• Entering characters
(p.
21)
43
To Next Page
Loading...
