• Do
not
place
any
objects
on
top
of
the
Plasma
TV.
If water spills onto the Plasma TV or foreign objects get
inside
it,
a short-circuit may occur which could result
in
fire or electric shock. If any foreign objects get inside the
Plasma
TV,
please consult
an
Authorized Service Center.
In
the unlikely event that you receive a shock from this
product
it
is possible that your household outlet may
be
wired improperly. Have
an
electrician verify that the TV's
outlet
is
properly wired. If the symptom persists, have the
TV serviced by a qualified authorized technician.
• To
prevent
the
spread
of
fire, keep
candles
G;
or
other
open
flames
away
from
this
product
at
all
times
• AC
Power
Supply
Cord
To
prevent
fire
or
electric
shock:
• The Plasma TV is
designed
to
operate
on
a 120 V AC,
60
Hz service.
Insert
the
power
cord
plug
as
far
as
it
will
go
into
the
wall
socket.
If the plug
is
not fully inserted, heat may generate, which
could cause a fire.
• The
included
power
cord
is
for
use
with
this
unit
only.
•
Do
not
use
any
power
cord
other
than
that
provided
with
this
TV.
•
Do
not
handle
the
power
cord
plug
with
wet
hands.
• Do
not
do
anything
that
might
damage
the
power
supply
cord.
• When
disconnecting
the
power
supply
cord,
hold
the
plug,
not
the
cord.
• Do
not
use
the
power
supply
cord
if
the
plug
or
cord
is
damaged.
Replace the cord or contact your Authorized Service Center.
• Do
not
use a
3-prong
to
2-prong
AC
plug
adapters
to
connect
your
TV's
plug
to
the
wall
outlet.
Doing so will defeat the TV plug's safety feature, which
can lead to a shock hazard. If the wall outlet does not
accommodate a 3-prong plug, have a qualified electrician
replace your outlet and check the associated wiring.
•
Handling
the
power
supply
cord
• Insert the power plug fully
into
the socket outlet. (If the
power plug is loose,
it
could generate heat and cause fire.)
•
Ensure
that
the
power
plug
is
easily
accessible.
•
Ensure
the
earth
pin
on
the
power
plug
is
securely
connected
to
prevent
electrical
shock.
• An apparatus with CLASS I construction shall
be
connected
to
a power socket outlet with a protective
earthing connection.
• Do
not
touch
the
power
plug
with
a
wet
hand. (This
may
cause
electrical
shock.)
• Do
not
use
any
power
cord
other
than
that
provided
with
this
TV.
(This
may
cause
fire
or
electrical
shock.)
• Do
not
damage
the
power
cord.
(A damaged
cord
may
cause
fire
or
electrical
shock.)
•
Do
not
move
the
TV
with
the
cord
plugged
in
the
socket
outlet.
•
Do
not place a heavy object
on
the cord or place the cord
near a high-temperature object.
•
Do
not twist the cord, bend it excessively, or stretch
it.
•
Do
not pull on the cord. Hold onto the power plug body
when disconnecting cord.
• Do not use a damaged power plug or socket outlet.
•
If
a
problem
occurs
(such
as
no
picture
or
no
sound),
or
if
smoke
or
an
abnormal
odor
is
detected
from
the
Plasma
TV,
unplug
the
power
supply
cord
immediately.
Continued use of the TV under these conditions might
cause a fire or permanent damage to the
TV
Have the TV
evaluated by
an
Authorized Service Center. Servicing of the
TV by unauthorized personnel is strongly discouraged due
to its high voltage.
•
If
water
or
an
object
gets
inside
the
Plasma
TV,
if
the
Plasma TV
is
dropped,
or
if
the
enclosure
becomes
damaged,
unplug
the
power
supply
cord
immediately.
A short-circuit may occur, which could cause a fire. Contact
an
Authorized Service Center for
an
evaluation.
I
it
CAUTION I
• Do
not
coverthe
ventilation
holes.
Doing so may cause the Plasma TV to overheat, which can
cause a fire or damage to the Plasma
TV
• Leave a
space
of
315/16"
(10 cm)
or
more
at
the
top,
left
and
right,
and
2 3/4"
(7
cm)
or
more
at
the
rear.
•
When
using
the
pedestal, keep
the
space between
the
bottom
of
the
TV
and
the
pedestal
or
stand
surface
clear
from
objects
that
may
obstruct
ventilation.
• When
Moving
the
Plasma TV
• Be
sure
to
disconnect
all
cables
before
moving
the
Plasma
TV.
Moving the TV with its cables attached might damage the
cables which,
in
turn, can cause fire or electric shock.
• To
prevent
an
electric
shock,
disconnect
the
power
plug
from
the
wall
outlet
as a
safety
precaution
before
carrying
out
any
cleaning.
•
Transport
only
in
upright
position.
Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.
•
Using
a
dry
cloth,
clean
any
dust
from
the
power
supply
cord
and
plug
regularly.
Build-up of dust
on
the power cord plug can increase
humidity, which might damage the insulation and cause a
fire.
This
Plasma TV radiates
infrared
rays;
therefore, it may affect other infrared communication
equipment. Install your infrared sensor
in
a place away from
direct or reflected light from your Plasma
TV
The TV
will
still
consume
some
power
as
long
as
the
power
supply
cord
is
connected
to
the
wall
outlet.
•
Display
panel
is
made
of
glass. Do
not
apply
strong
force
or
impact
to
the
display
panel.
This may cause damage resulting
in
injury.
• The TV is heavy. TV
should
be handled
by
2
or
more
people.
Support
as
shown
to
avoid
injury
by
the
TV
tipping
or
falling.
5
To Next Page
Loading...
