Attaching
the
pedestal
to
TV
.Assembling
the
pedestal
• Fix securely with assembly screws (Total 4 screws).
• Tighten screws firmly.
Assembly screws
Accessories
Assembly screws (8)
THEL090N
size
(M5 x 25) (Black)
Poles (2)
.Set-up
• Carry out work
on
a horizontal and level surface.
• Tighten assembly screws (total 4 screws) loosely at first,
then tighten them firmly to fix securely.
•
»
(")
(")
CD
(J)
(J)
o
....,
roO
(J)
-
o
"'0
.-
0"
::J
Q)
»
(")
(")
CD
(J)
(J)
o
....,
roO
(J)
•
(1)
or ® is printed at the
front
of
the poles.
Base (1)
Rear side
Bottom
view
;;=---Hole
for pedestal
installation
llJI---------Pole
Assembly screws
~
~
I "
~!>
"'.
.
~
,
. .
, .
~"'<:~~
"~("'~
Removing
the
pedestal
from
the
TV
Be sure to remove the pedestal
in
the following way when using the wall
hanging bracket or repacking the
TV.
CD
Remove the assembly screws (Total 4 screws) from the
TV.
® Pull out the TV from the pedestal.
@ Remove the assembly screws (Total 4 screws) from the pole.
(
Warning)
Do
not
disassemble
or
modify
the
pedestal.
• Otherwise the TV may fall over and become damaged, and personal injury may result.
(
Caution)
Do
not
use
any
pedestal
other
than
that
provided
with
this
TV.
• Otherwise the
TV
may fall over and become damaged, and personal injury may result.
Do
not
use
the
pedestal
if
it
becomes
warped
or
physically
damaged.
•
If
you
use
the
pedestal
when
it
is
physically
damaged,
personal
injury
may
result.
Contact
your
nearest
Panasonic
Dealer
immediately.
During
set-up, make
sure
that
all
screws
are
securely
tightened.
• If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the
TV,
and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do
not
remove the pedestal
by
any methods other than the specified procedure.
(above)
• Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.
9
To Next Page
Loading...
