Panasonic Viera TC-P60GT30 - First Time Setup; Turn the TV on with the POWER Button; Configure Your Viewing Mode

First Time Setup
The first time setup screen
is
displayed only
when the TV
is
turned
on
for the first time after the power cord
is
inserted into a
wall outlet
and when "Auto
power on"
(p.
53)
is
set to
"No".
Turn the TV
On
with the POWER
button
(TV) (Remote)
POWER
POWER
or
Configure your viewing mode
CD
Select your
language
CD
select
(g)QK
®Select
your country
CD
select
(g)QK
@Select
your viewing mode
(Be sure to select "Home use")
CD
select
(g)QK
e
Please confirm your selection (Home Use) before pressing
OK
button.
•If
you
select "Store Demonstration"
by mistake
in@,
confirmation screen
will
be
displayed.
You
are selectmg the store demonstration mode
Yes
-
If
you
select
Yes
the
p1cture
mode
Will
regularly
reset
to
V1V1d"
and
a
P1cture
Refresh
message
w1ll
be
displayed
on
the
screen
CD
select
(g)
OK
e
Select "No" and return to previous screen
@
• If
you select
"Yes", Screen
enters the store demonstration mode.
To
display the
"Set
viewing
mode"
screen again as shown above and
select
"Home Use", do one
of
the
following:
• Press and hold down the front POWER button for at least five seconds.
•
Unplug power cord for
30 seconds and plug it again.
( Note )
e If
you use any other step other than
@
then turn the TV off, or if you used
the EXIT
button to quit before completing the settings, the next time you turn
the TV
on,
"First
time
setup" will
not be
automatically
displayed.
•
The settings up to that point are saved.
•
You
can start
"First
time
setup".
(p.
53)
o
Language, ANT/Cable
setup,
Input labels,
and
Clock
can
also be changed
in
the
Settings
Menu.
(p.
53)
15