Panasonic Viera TC-P60GT30 - Network Settings; Connection Test; Display the Menu

40
Network settings
This is a setting for connecting to a broadband environment.
• Press to exit from
a menu screen
EXIT
• Press to go back to
the previous screen
RETURN
Connection test
Display the menu
Select "Network settings"
.
~ ... •·.·.·• ... •· •. ·.· ... ··.· .. · •.. • ... ·•·.· ... ·.·.· ........ · ............... · .. ··Ji.. ~···.··' select
~"•<•··( ;
\?•'•>~~-""
"<<]~;···········m~••••··•••·•·•·•··¢/
""'''"·''"'"'#"'
CD select
@adjust
Check that the Network settings are as shown below, and then start "Connection test".
CD Select "Connection test" and press OK @ Complete Connection test
(It takes a while to cancel the test.) Success-->Completion screen is displayed.
® Displayed Connection test screen Error-->Follow the directions on screen to complete the setting.
If
you perform the Proxy settings, check the Proxy address
and the Proxy port number.
Connection test
12! ' ' ' ' '
0 J J> 'J
0 >< <'I ,
0 Check connection to the Internet
0 Check commumcat1on w1th VIERA Connect server
Test
1n progress
This setting is performed only when "Wireless (WiFi)" is selected in "Network connection" above.
• Displayed "Current settings and status" screen (If connected with Wireless LAN Adapter)
You can confirm the AP connection status.
(SSID/Wireless type/Security type/Encryption type/Connection status /Signal strength)
CD Press "Wireless network"
(example)
CD select
@OK
® When you change "Wireless network" -->Press "No"
See "Sets I Changes wireless network setting" on p. 41
and follow the directions on screen to complete the
setting.
You need to be "Connected" to use network devices.
Please set Access point settings to "Connected".