How to Use Menu Functions
42
Menu
Item Adjustments / Configurations (alternatives)
Picture
Picture in Picture Displays two windows at once (p. 66)
3D Settings Adjusts and sets to view 3D images (p. 38)
Screen Display
Turns the screen off when you select [Off]
[Off] / [On]
The sound is active even if the screen turns off.
Press any buttons (except Standby) to turn the screen on.
This function is effective in reducing power consumption when listening to the
sound without watching the TV screen.
Area Dimmer Control
Automatically controls dark areas according to the images [Off] / [On]
If the uncomfortable dark images occur, set to [Off].
This function is available when [Viewing Mode] is set to [Dynamic], [Normal] or
[Cinema]. (except multi window mode)
Advanced Settings
1080p Pure Direct
Reproduces the original image quality in detail for 1080p (HDMI) input signal
[Off] / [On]
Not valid on 3D or multi window mode
Intelligent Frame
Creation
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth [Off] / [Min] / [Mid] / [Max]
Depending on the contents, images may be noisy. To prevent the noise, change
the setting.
Not valid on PC mode or when [Viewing Mode] is set to [Game]
24p Smooth Film
Automatically compensates the picture frame rate to make the 24p source movie
images smooth [Off] / [Min] / [Mid] / [Max]
This is available only for 24p signal input and displayed instead of [Intelligent
Frame Creation].
Not valid on PC mode or when [Viewing Mode] is set to [Game]
Film Cadence
Detection
Improves vertical resolution for movie images [Off] / [On]
This function is available for the interlaced signal (except in the mode of PC,
multi window, VIERA Connect or when [Viewing Mode] is set to [Game]).
3D Refresh Rate
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear [Auto] / [100Hz] / [120Hz]
[100Hz]:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
[120Hz]:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz. If flicker
noises appear with 50 Hz input signal.
16:9 Overscan
Selects the screen area displaying the image [Off] / [On]
[On]:
Enlarges the image to hide the edge of the image.
[Off]:
Displays the image in the original size.
Set to [On] if noise is generated on the edge of the screen.
This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].
This function can be memorised separately for SD (Standard definition) and HD
(High definition) signals.
Not valid on PC mode or VIERA Connect
AV Colour System
Selects optional colour system based on video signals in AV mode
[Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]
To Next Page
Loading...
