Retuning from Setup Menu
52
DVB-C, DVB-T, Analogue channels
1
Select DVB-C, DVB-T or Analogue
(p. 21)
2
Display the menu and select [Setup]
Setup
select
access
3
Select [DVB-C Tuning Menu], [DVB-T Tuning Menu] or
[Analogue Tuning Menu]
DVB-C Tuning Menu Access
DVB-T Tuning Menu Access
Analogue Tuning Menu Access
select
access
4
Select [Auto Setup]
Auto Setup Access
select
access
5
Set the Auto Setup settings (DVB-C)
Search Mode Free Channels
Scan Mode
Frequency
Symbol Rate
Network ID
DVB-C Auto Setup Settings
Quick
Auto
Auto
Auto
Start scan
select
access / store
After settings, select [Start scan].
[Scan Mode]
[Full]: Scans the whole frequency range.
[Quick]: Scans the suitable frequency in your country.
Normally set [Frequency], [Symbol Rate] and [Network ID] to [Auto].
If [Auto] is not displayed or if necessary, enter the value specified by your cable provider with numeric buttons.
6
Start Auto Setup (Settings are made automatically)
DVB-C:
DVB-C Auto Setup
All DVB-C tuning data will be erased
0% 100%
1
2
3
100
100
CBBC Channel
BBC Radio Wales
E4
100
Searching
DVB-C Auto Setup
Progress
This will take about 3 minutes.
No. Channel Name Type
Free TV
Free TV
Free TV
Quality
Free TV: 3 Pay TV: 0 Radio: 0
To Next Page
Loading...
