36
Set DVB channel manually
Manual Tuning
Normally use “Auto Setup” or “Update Channel List” to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial or dish, use this function.
All channels found will be added to the Channel List. ●
DVB-S:
DVB-S Manual Tuning
Transponder Frequency
Analogue Scan 21 68
Signal Strength 010
Signal Quality 0 10
10847 MHz
Satellite
Astra 19.2° E
Polarisation
Horizontal
Symbol Rate
Auto
Service ID
Auto
Modulation
Auto
Please consult the received satellite
broadcasting companies for the setting.
Set the satellite Set “Transponder Frequency”,
“Symbol Rate”, “Polarisation”,
“Modulation” and “Service ID”
Search
select
set
select
set
DVB-C:
Enter the frequency Search
DVB-C Manual Tuning
Analogue Scan 21 68
Symbol Rate
No. Channel Name Type New
Free TV: 0 Pay TV: 0 Radio: 0 Data: 0
Stopped
Signal Strength 0 10
Signal Quality 0 10
Auto
Frequency
474,00 MHz
Set Symbol Rate, and then perform this function.
Normally set Symbol Rate “Auto”. ●
DVB-T:
select channel
adjust frequency
Search
DVB-T Manual Tuning
Analogue Scan 21 68
No. Channel Name Type New
Free TV: 0 Pay TV: 0 Radio: 0 Data: 0
Stopped
Signal Strength 0 10
Signal Quality 0 10
Frequency
474,00 MHz[CH21]
Set where the level of “Signal Quality” becomes the maximum.
Update DVB channel automatically
Update Channel List
You can add new channels, delete removed channels, update channel name and position automatically to
Channel List.
DVB-T Update Channel List
CH Channel Name Type Quality
Searching
Analogue Scan 21 68
Progress CH 21 68
This will take about 3 minutes.
Free TV: 0 Pay TV: 0 Radio: 0 Data: 0
Channel List is updated with keeping your settings in Favourites Edit, ●
Channel List, Child Lock, etc.
To update DVB-S channels, the satellite, search mode and scan mode ●
settings are required before updating.
DVB-S Auto Setup Settings
Scan Mode
Quick
Free ChannelsSearch Mode
Astra 19.2° ESatellite
set
select
store
Tuning and Editing Channels
(DVB)
To Next Page
Loading...
