How to Use Menu Functions
41
Menu
Item Adjustments / Configurations (alternatives)
Sound
Bass Adjusts level to enhance or minimise lower, deeper sound output
Treble Adjusts level to enhance or minimise sharper, higher sound output
Equaliser
Adjusts the frequency level to suit your favourite sound quality
●
This function is available when [Mode] is set to [User].
●
Select the frequency and change the frequency level by using the cursor button.
●
To enhance the bass sound, raise the level of the lower frequency. To enhance
the treble sound, raise the level of the higher frequency.
●
To reset the levels of each frequency to the default settings, select [Reset to
Defaults] by using the cursor button, and then press the OK button.
Balance Adjusts volume level of right and left speakers
Headphone Volume Adjusts the volume of the headphones
Surround
Surround sound settings [Off] / [V-Audio] / [V-Audio Surround]
[V-Audio]:
Provides a dynamic enhancer of width to simulate improved spatial effects.
[V-Audio Surround]:
Provides a dynamic enhancer of width and depth to simulate improved spatial
effects.
●
Switching is also possible by the SURROUND button on the remote control (p. 11).
Auto Gain Control
Automatically regulates large sound level differences between channels and
inputs [Off] / [On]
Volume Correction Adjusts the volume of individual channel or input mode
Speaker Distance to
Wall
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Preferred Multi Audio
Selects the preferred language for digital channel multi audio (depending on the
broadcaster) [English] / [Welsh] / [Gaelic] / [Irish]
NICAM
Near Instantaneous Companded Audio Multiplex
Reproduces NICAM stereo sound [Off] / [On]
●
Off if reception is poor (FM monaural sound)
●
For Analogue mode
SPDIF Selection
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
●
For DVB mode or video contents of Media Player / Network services (p. 67, 77)
●
ARC (Audio Return Channel): A function of digital audio output using HDMI cable
HDMI1 / 2 Input
Selects to fit the input signal [Digital] / [Analogue] (p. 93)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]:
When sound is not carried via the HDMI-DVI adaptor cable connection
●
For HDMI input
To Next Page
Loading...
