English
9
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
There are some restrictions on placement for viewing 3D images. For details (p. 17, 18)
Terminals
3
4
2
1
5
6
7
8
9
10
1
USB 1 / 2 port
2
SD Card slot
3
Headphone jack
4
CI slot
5
ETHERNET
6
DIGITAL AUDIO OUT
7
AV1 (SCART)
8
AV2 (COMPONENT /
VIDEO)
9
Terrestrial / cable terminal
10
HDMI1 / 2
Connections
Mains lead and aerial
Cable
DVB-C, DVB-T, Analogue
AC 220-240 V
50 / 60 Hz
Mains lead
Terrestrial aerial
RF cable
Mains lead
Push until both side
tabs click
Make sure that
the mains lead is
securely fixed.
To remove from the TV:
tabs
Press both tabs and pull
on mains connector to
release
Less than 10 cm
Ferrite core - Large size (supplied)
Installing the Ferrite core
Pull back the tabs
(in two places)
Wind the cable Close
If it is difficult to wind
your cable, set the cable
through as shown.
Take care of the Ferrite
core not to move.
To Next Page
Loading...
