3. Preparation
9
3.3 Setting the language, date
and time
R The play lamp lights if these settings are not
configured.
1 Press the MN button to turn on the display.
2 Press or to select the desired
language.
3 Press .
4 Press again.
5 Set the date and time.
R Press to select an item (i.e., year,
month, day, etc.).
R Press or to change the setting.
6 When finished, press .
Note:
R The date and time settings may be deleted when
there is a power outage. In this case, reconfigure
the settings.
R The time may become out of sync over time (about
60 seconds per month).
prj_4367-as_is.book Page 9 Monday, April 24, 2017 10:37 AM
To Next Page
Loading...
