4. Basic operations
10
4. Basic oper ations
Basic operations
4.1 Answering doorphone calls
When you receive a call from a doorphone, the main
monitor and extension monitor ring, and display an
image from the doorphone.
To answer the call
Press MN.
R Speak within about 50 cm of the microphone.
R Speak alternatively with the visitor. If you and
the visitor speak at the same time, you will not
hear each other.
R You can talk for up to about 90 seconds.
To end the call
Press MN.
4.2 Talking with other devices
You can make intercom calls between the main monitor
and extension monitor.
To make a call
1. Press MN.
2. If there are multiple devices, select the device to
page → .
R To page all devices, select “Call all
together” → .
3. Page the other party.
4. Talk with the paged party when they answer the call.
5. When finished, press MN.
To receive a call
1. When the intercom call is received, press MN
to talk to the paging party.
2. When finished, press MN.
4.3 Monitoring the outside with
the doorphone
You can monitor the sounds and images from the
doorphone using the main monitor and extension
monitor.
1 Press MN.
R If there are multiple doorphones, select the
desired doorphone → .
R The images from the doorphone are displayed.
2 Monitor the sound and image.
R You can talk to the monitored party by pressing
MN.
3 When finished, press MN.
4.4 Recording automatically
(recording a received call)
The main monitor and extension monitor can record
doorphone images (still images). They can save images
from up to 50 doorphone calls or monitoring sessions.
Each time new images are recorded, they are saved in
an image set of up to 8 images.
When a visitor calls you, the main monitor and
extension monitor record 8 images automatically
(whether you answer the call or not). Recording starts
about 2 seconds after you receive the call.
When you do not answer a call
The recorded images are saved as unplayed images,
and the play lamp lights.
When there are multiple doorphones
R When you are talking or monitoring and there is an
incoming call from another doorphone, images from
the incoming call will not be displayed and recorded.
In order to display and record incoming calls, you
must end the current call or stop monitoring.
R If there is an incoming call from another doorphone,
while receiving an incoming call, the number of
recorded images from the 1st caller (8 images) are
reduced.
When the memory is full (auto image updating)
When the memory is full, new images overwrite the
oldest images automatically. This occurs even if the
oldest images are unplayed images.
4.5 Recording manually
(recording while monitoring)
The main monitor and extension monitor can manually
record 8 images while monitoring.
While monitoring, press .
4.6 Playing recorded images
When there are new (i.e., unplayed) images recorded,
the play lamp (page 8) lights.
1 Press MN.
R “Recorded image list” screen is displayed.
2 Select “Unplayed images” (for new images) or
“Played images” (for images that have been
played) → .
R The most recent image set of the selected type
is displayed.
3 Browse the image sets and images.
R The following operations are available.
Plays back all images in an image
set continuously
prj_4367-as_is.book Page 10 Monday, April 24, 2017 10:37 AM
To Next Page
Loading...
