3.3 Setting the language, date and
time
R The play lamp lights if these settings are not
configured.
1 Press the M N button to turn on the display.
2 Press or to select the desired
language.
3 Press
.
4 Press
again.
5 Set the date and time.
R Press
to select an item (i.e., year, month,
day, etc.).
R Press or to change the setting.
6 When finished, press .
Note:
R The date and time settings may be deleted when
there is a power outage. In this case, reconfigure the
settings.
R The time may become out of sync over time (about
60 seconds per month).
9
3. Preparation
To Next Page
Loading...
