EasyManua.ls Logo

Panasonic VL-V524 - Preparation and Setup Guide; Controls Overview

Panasonic VL-V524
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Examples of camera angle
R The angle can also be adjusted to the right
or upper right.
Important:
R When the camera angle is adjusted to the
upper left or upper right, the image may be
slightly distorted.
4 Connect the wires.
Loosen the screws. Push in the wires to the
terminal connectors (non-polar), then tighten
the screws (A).
5 Attach the doorphone to the mounting base.
A Screws (accessory) × 4
6 Attach the front panel in the order of A B.
A Recommended torque: 0.5 N·m
{5.1 kgf·cm}
Maximum torque: 0.7 N·m {7.1
kgf·cm}
Facing upper leftFacing left
Facing forwards Facing upwards
1
When using flush mount box (option):
Model No. VL-MB524
Attach the doorphone to the flush mount
box.
A Screws (accessory) × 4
A
A
A
B
prj_6905-en_gb.book Page 10 Friday, March 8, 2019 2:29 PM

Other manuals for Panasonic VL-V524

Related product manuals