3
Supplied accessories for installation
Important:
R You will need the following additional items to install and configure the doorphone and the
main monitor/extension monitor.
Note:
R The illustrations in the supplied manual(s) may vary slightly from the actual product.
*1 Used when using a separately sold flush mount box for installation.
For the doorphone
Mounting base × 1
Screw × 2
(3.8 mm × 20 mm)
Screw × 4
(4 mm × 12 mm)
Screw × 4
(4 mm × 25 mm)
*1
For the main monitor/extension monitor
Screw × 2
(4 mm × 16 mm)
Mounting bracket × 1
[Locally procured]
– Wires (for doorphone and other connections):
Prepare wires of the appropriate specification. (a"Wire type and length")
prj_6905-en_gb.book Page 3 Friday, March 8, 2019 2:29 PM
To Next Page
Loading...
