To Next PageTo Next PageWhy do images appear distorted on my Panasonic VL-V524 Intercom System?
The distorted images on your Panasonic Intercom System are due to the characteristics of the camera lens, and this is not a malfunction.
Why does the sound cut out on my Panasonic VL-V524?
If the sound on your Panasonic Intercom System cuts in/out or fades, it could be due to a few reasons. If the area around the main monitor, extension monitor, sub monitor, or doorphone is noisy, try using the 'Press-to-talk' mode. Also, make sure that you are not covering the top part of the sub monitor with your hand. Finally, ensure that the sub monitor is not too far from the main monitor and that there are no obstructions like concrete walls blocking the signal; if there are, move the sub monitor closer or to an area without obstructions.
What to do if faces are dark on Panasonic VL-V524 images?
If the images of people's faces appear dark on your Panasonic Intercom System, it might be due to strong sunlight or backlight in the area around the doorphone. You can try using the backlight compensation function to improve the image.
How to fix a Panasonic VL-V524 Intercom System when the ringtone doesn't sound?
If the ringtone on your Panasonic Intercom System doorphone is not sounding, first, ensure that the ringtone volume is not muted and activate the sound for the ringtone. Also, check if the sub monitor's batteries are discharged and charge them if necessary.
Why are the images on my Panasonic VL-V524 dirty and unclear?
If the images on your Panasonic Intercom System are dirty, unclear, or not in focus, it could be due to dirt or water condensation on the doorphone's lens. Try wiping the lens with a soft, dry cloth. If there is water condensation, wait for it to evaporate.
Why are images distorted on my Panasonic VL-V524 sub monitor?
If the images on your Panasonic Intercom System sub monitor distort or are displayed slowly, ensure that the top part of the sub monitor is not being covered. Also, the sub monitor might be too far from the main monitor, or there might be an obstruction like a concrete wall blocking the signal. Try moving the sub monitor closer to the main monitor or to an area without obstructions.
What to do if the image of the subject is displayed in black and white (or bluish-purple) on my Panasonic VL-V524 Intercom System?
If the image is displayed in black and white (or bluish-purple), especially at night or when there is poor light around the doorphone, turn on the LED lights when it is dark. It is also recommended to install extra lights in the area around the doorphone.
What to do if images of people's faces are dark on my Panasonic VL-V524?
If the images of people's faces appear dark when there is strong sunlight or a backlight in the area around the doorphone, use the backlight compensation function.
How to turn off demo mode on Panasonic VL-V524 Intercom System?
If “Demo mode” is displayed on the screen of your Panasonic Intercom System, the “Demo mode” feature is enabled. Set “Demo mode” to “Off”.
Why are the images on my Panasonic VL-V524 Intercom System white or black?
If the images on your Panasonic Intercom System are white or black, the brightness of the display might not be correctly adjusted. Adjust the brightness when images are displayed.
General| Type | Video Intercom System |
|---|---|
| Camera | Yes |
| Display | No display |
| Audio | Two-way audio |
| Night Vision | Yes |
| Viewing Angle | 87° horizontal |
| Power Source | AC 100-240V, 50/60Hz |
Crucial safety warnings to prevent severe injury, fire, or electric shock.
Safety guidelines to avoid accidents, injuries, and property damage.
Precautions for preventing battery leakage, heat generation, or accidents.
Essential safety precautions to reduce risks during product usage.
Identifies buttons and indicators for the doorphone and main monitor.
Instructions for correctly installing rechargeable batteries in the sub monitor.
Procedure for charging the sub monitor using the supplied AC adapter.
How to receive, answer, and end calls from the doorphone.
Configuration and operation of connected electric locks for doors or gates.
Adding sub and extension monitors to the main monitor system.
Solutions for distorted, dark, or unclear doorphone images.
Explanation of error messages on the main monitor and their causes.
Explanation of error messages on the extension monitor and their causes.
Explanation of error messages on the sub monitor and their causes.
