Panasonic VL-V524 - Ringtone Settings; Main Monitor;Extension Monitor - Function Settings List

8.3 Ringtone settings
Main monitor/extension monitor:
You can change the ringtone type and volume that is heard during an incoming call.
R For information about how to configure settings, see
page 25.
Sub monitor:
See page 28 for information about changing the ringtone type. Perform the following procedure to adjust the ringtone
volume.
1. When the information screen is displayed, press
® select the item to change the volume for ® .
2. Press to adjust the volume.
R To mute the volume, press and hold until is displayed. (The paging volume cannot be turned off.)
–
To activate the sound again, press
.
8.4 Main monitor/extension monitor - function settings list
You can change the settings to match how the main monitor or extension monitor is used.
1 Press M
N.
2 Select the desired item ®
.
R Repeat this step as necessary to navigate to the desired setting.
3 Select the desired setting ® .
4 Press M N.
Note:
R If
you do not perform any operations for 90 seconds while changing these settings, or if an incoming call is received,
the setting is cancelled and the screen turns off.
R In the following table, default settings are indicated by < >.
R While changing settings, “U” is displayed to the left of the currently selected item.
Item name: “Information display”
Sub-menu
Settings
1
Status of connected devices
*1
–
*1 This item is not displayed for the extension monitor; only its contents are displayed.
Item name: “Initial settings”
Sub-menu
Settings
1 2 3
Time and date
settings
*2
– – 2020-1-1 0:00
Zoom position
settings
*1
,
*3
Doorphone 1
- 2
– –
For details see
page 23.
Wide/Zoom
settings
*1
,
*3
Doorphone 1
- 2
When
visitors
come/When
monitoring
Zoom, <Wide>
24
8. Additional functions