Panasonic VL-V524 - Main Monitor Operations with the Lobby Station

12.2.2 Calling a receptionist
1 Press M N.
2 Press M
N or M N to search for the receptionist.
3 Press M N to call.
12.2.3 Opening the door by entering an unlock code
1 Press M#N.
2 Enter the 4-digit unlock code.
3 Press M N.
12.3 Main monitor operations with the lobby station
12.3.1 Image viewing screen of the main monitor
Image from lobby station Image from camera
1
Camera
Lobby
1
Status icons
1
Indicates which lobby station is calling, monitoring, or talking. ("1" indicates the device number.)
1
Indicates which camera is monitoring. ("1" indicates the device number.)
Indicates that the main monitor is talking.
Indicates that the main monitor is monitoring.
12.3.2 Monitoring the outside with the lobby station or camera
1 Press M N.
R If there are multiple devices, select the desired device ®
.
R The images from the device are displayed.
R If a camera is connected to the lobby station, you can alternate monitoring between the lobby station and
camera by pressing
Camera
or
Lobby
.
2 When finished, press M N.
Note:
R Depending on the composition of the system that the VL
-V901 lobby station is connected to, monitoring may not
be available.
12.3.3 Opening entrance doors
You
can open the entrance door during an incoming call, or while talking to a visitor or monitoring with a lobby station
or camera.
To open the entrance door during an incoming call, or while talking or monitoring, press
.
39
12. VL-V901 basic operations