Panasonic VT60 series

All settings
Picture
Screen settings
MENU Menu > Picture > Screen settings
Screen format
(Full/H-FILL/JUST/SIDECUT JUST/4:3/ZOOM/SIDECUT ZOOM)
SD signal : Full JUST 4:3 ZOOM
HD signal : Full H-FILL JUST SIDECUT JUST 4:3
ZOOM SIDECUT ZOOM
Changes the format (aspect ratio). Lets you choose the aspect depending on
the format of received signal.
Gray-out in 3D mode.
Overscan
(Off/On)
Selects the screen area displaying the image for FULL aspect.
On: Enlarges the image to hide the edge of the image.
Off: Displays the image in the original size.
Set to On if noise is generated on the edge of the screen.
H size
(Size 1/Size 2)
Adjusts the horizontal display range to reduce noise of both side edges of an
image.
Size 2: Adjusts the image size according to the aspect mode to reduce noise.
Aspect mode: 4:3
The width will be decreased on both sides to reduce noise.
Aspect mode: FULL/JUST/Sidecut Just/(H-FILL/ZOOM/Sidecut Zoom)
The width will be increased on both sides to reduce noise.
Gray-out in 3D mode.
Zoom adjustments
Adjusts vertical position and size when FORMAT setting is set to JUST or
ZOOM.
- JUST: V-size max is 3
- ZOOM: V-size max is 15
MENU Menu > Picture > Screen settings MENU Menu > Picture > Screen settingsMENUMENU Menu > Picture > Screen settingsMenu Picture Screen settings
Screen format
(Full/H-FILL/JUST/SIDECUT JUST/4:3/ZOOM/SIDECUT ZOOM)
SD signal : Full JUST 4:3 ZOOM
HD signal : Full H-FILL JUST SIDECUT JUST 4:3
ZOOM SIDECUT ZOOM
Changes the format (aspect ratio). Lets you choose the aspect depending on
the format of received signal.
Screen format
(Full/H-FILL/JUST/SIDECUT JUST/4:3/ZOOM/SIDECUT ZOOM)
SD signal : Full JUST 4:3 ZOOM
HD signal : Full H-FILL JUST SIDECUT JUST 4:3
ZOOM SIDECUT ZOOM
Changes the format (aspect ratio). Lets you choose the aspect depending on
the format of received signal.
Screen format
(Full/H-FILL/JUST/SIDECUT JUST/4:3/ZOOM/SIDECUT ZOOM)
Gray-out in 3D mode.Gray-out in 3D mode.
Overscan
(Off/On)
Selects the screen area displaying the image for FULL aspect.
On: Enlarges the image to hide the edge of the image.
Off: Displays the image in the original size.
Set to On if noise is generated on the edge of the screen.
Overscan
(Off/On)
Selects the screen area displaying the image for FULL aspect.
On: Enlarges the image to hide the edge of the image.
Off: Displays the image in the original size.
Set to On if noise is generated on the edge of the screen.
Overscan
(Off/On)
On
Off
H size
(Size 1/Size 2)
Adjusts the horizontal display range to reduce noise of both side edges of an
image.
Size 2: Adjusts the image size according to the aspect mode to reduce noise.
Aspect mode: 4:3
The width will be decreased on both sides to reduce noise.
Aspect mode: FULL/JUST/Sidecut Just/(H-FILL/ZOOM/Sidecut Zoom)
The width will be increased on both sides to reduce noise.
H size
(Size 1/Size 2)
Adjusts the horizontal display range to reduce noise of both side edges of an
image.
Size 2: Adjusts the image size according to the aspect mode to reduce noise.
Aspect mode: 4:3
The width will be decreased on both sides to reduce noise.
Aspect mode: FULL/JUST/Sidecut Just/(H-FILL/ZOOM/Sidecut Zoom)
The width will be increased on both sides to reduce noise.
H size
(Size 1/Size 2)
Aspect mode: 4:3
Aspect mode: FULL/JUST/Sidecut Just/(H-FILL/ZOOM/Sidecut Zoom)
Gray-out in 3D mode.Gray-out in 3D mode.
Zoom adjustments
Adjusts vertical position and size when FORMAT setting is set to JUST or
ZOOM.
- JUST: V-size max is 3
- ZOOM: V-size max is 15
Zoom adjustments
Adjusts vertical position and size when FORMAT setting is set to JUST or
ZOOM.
- JUST: V-size max is 3
- ZOOM: V-size max is 15
Zoom adjustments
JUST
ZOOM
174 (0600204)