All settings
Picture
3D settings
MENU Menu > Picture > 3D settings
Auto detect 3D
(Off/Auto 1/Auto 2)
Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note: Choose 3D mode manually when auto detection is not available.
3D signal notification
(Off/On)
On: Displays a message according to the signal received by the Auto detect
3D.
3D refresh rate
(96Hz*/100Hz/120Hz) *24Hz only
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz: If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
120Hz: If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
Gray-out in 2D mode
2D 3D depth
(High/Mid/Low)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
3D adjustment
(Off/On)
Adjust the left eye versus right eye depth effect of the image. Set to On to
adjust Effect (-3 to +3).
Gray-out in 2D mode
MENU Menu > Picture > 3D settings MENU Menu > Picture > 3D settingsMENUMENU Menu > Picture > 3D settingsMenu Picture 3D settings
Auto detect 3D
(Off/Auto 1/Auto 2)
Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note: Choose 3D mode manually when auto detection is not available.
Auto detect 3D
(Off/Auto 1/Auto 2)
Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note: Choose 3D mode manually when auto detection is not available.
Auto detect 3D
(Off/Auto 1/Auto 2)
Auto 1
Auto 2
3D signal notification
(Off/On)
On: Displays a message according to the signal received by the Auto detect
3D.
3D signal notification
(Off/On)
On: Displays a message according to the signal received by the Auto detect
3D.
3D signal notification
(Off/On)
On Auto detect
3D
Auto detect
3D
3D refresh rate
(96Hz*/100Hz/120Hz) *24Hz only
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz: If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
120Hz: If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
3D refresh rate
(96Hz*/100Hz/120Hz) *24Hz only
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz: If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
120Hz: If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
3D refresh rate
(96Hz*/100Hz/120Hz) *24Hz only
100Hz
120Hz
Gray-out in 2D modeGray-out in 2D mode
2D 3D depth
(High/Mid/Low)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
2D 3D depth
(High/Mid/Low)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
2D 3D depth
(High/Mid/Low)
3D adjustment
(Off/On)
Adjust the left eye versus right eye depth effect of the image. Set to On to
adjust Effect (-3 to +3).
3D adjustment
(Off/On)
Adjust the left eye versus right eye depth effect of the image. Set to On to
adjust Effect (-3 to +3).
3D adjustment
(Off/On)
On
EffectEffect -3 +3
Gray-out in 2D modeGray-out in 2D mode
176 (0600205)
To Next Page
Loading...
