11
Item Unit Outdoor Unit
Compressor
Type Hermetic Motor
Motor Type Brushless (4-poles)
Rated Output kW 4.30
Fan
Type Propeller Fan
Material PP
Motor Type DC (8-poles)
Input Power W —
Output Power W 60
Fan Speed rpm
Cooling: 600 (Top), 640 (Bottom)
Heating: 520 (Top), 560 (Bottom)
Heat Exchanger
Fin material Aluminium (Pre Coat)
Fin Type Corrugated Fin
Row × Stage × FPI 2 × 51 × 18
Size (W × H × L) mm 903.7 × 1295.4 × 38.1
Power Source (Phase, Voltage, Cycle)
ø Three
V 400
Hz 50
Input Power
Condition
(Ambient/Water)
A35W7 A7W35 A2W35
kW Cooling: 3.56 Heating: 2.53 Heating: 3.49
Maximum Input Power For Heatpump System kW 7.91
Power Supply 1 : Phase (Ø) / Max. Current (A) / Max. Input Power (W) 3Ø / 11.9 / 7.91k
Power Supply 2 : Phase (Ø) / Max. Current (A) / Max. Input Power (W) 3Ø / 13.0 / 9.00k
Power Supply 3 : Phase (Ø) / Max. Current (A) / Max. Input Power (W) — / — / —
Starting Current A 5.4
Running Current
Condition
(Ambient/Water)
A35W7 A7W35 A2W35
A Cooling: 5.4 Heating: 3.9 Heating: 5.3
Maximum Current For Heatpump System A 11.9
Power Factor
Power factor means total figure of compressor and
outdoor fan motor.
% Cooling: 97 Heating: 96 Heating: 97
Power Cord
Number of core —
Length m (ft) —
Thermostat Electronic Control
Protection Device Electronic Control