14
Item Unit Outdoor Unit
Compressor
Type Hermetic Motor
Motor Type Brushless (4-poles)
Rated Output kW 4.76
Fan
Type Propeller Fan
Material PP
Motor Type DC / Transistor (8-poles)
Input Power W —
Output Power W 60
Fan Speed rpm
Cooling: 680 (Top), 720 (Bottom)
Heating: 580 (Top), 620 (Bottom)
Heat Exchanger
Fin material Aluminium (Pre Coat)
Fin Type Corrugated Fin
Row × Stage × FPI 2 × 51 × 19
Size (W × H × L) mm 898.8 × 1295.4 × 44
Power Source (Phase, Voltage, Cycle)
ø Three
V 400
Hz 50
Input Power
Condition
(Ambient/Water)
A35W7 A7W35 A2W35
kW Cooling: 4.76 Heating: 3.74 Heating: 5.16
Maximum Input Power For Heatpump System kW 10.27
Power Supply 1 : Phase (Ø) / Max. Current (A) / Max. Input Power (W) 3Ø / 15.5 / 10.27k
Power Supply 2 : Phase (Ø) / Max. Current (A) / Max. Input Power (W) 3Ø / 13.0 / 9.00k
Power Supply 3 : Phase (Ø) / Max. Current (A) / Max. Input Power (W) — / — / —
Starting Current A 7.2
Running Current
Condition
(Ambient/Water)
A35W7 A7W35 A2W35
A Cooling: 7.2 Heating: 5.7 Heating: 7.8
Maximum Current For Heatpump System A 15.5
Power Factor
Power factor means total figure of compressor and
outdoor fan motor.
%
Cooling: 96
Heating: 96
Power Cord
Number of core —
Length m (ft) —
Thermostat Electronic Control
Protection Device Electronic Control
To Next Page
Loading...
