8
Item Unit Outdoor Unit
Additional Gas Amount g/m (oz/ft) 50 (0.5)
Refrigeration Charge Less m (ft) 10 (32.8)
Compressor
Type Hermetic Motor
Motor Type Brushless (4-poles)
Rated Output kW 4.30
Fan
Type Propeller Fan
Material PP
Motor Type DC (8-poles)
Input Power W —
Output Power W 60
Fan Speed rpm
Cooling: 550 (Top), 590 (Bottom)
Heating: 490 (Top), 530 (Bottom)
Heat Exchanger
Fin material Aluminium (Pre Coat)
Fin Type Corrugated Fin
Row × Stage × FPI 2 × 51 × 18
Size (W × H × L) mm 903.7 × 1295.4 × 38.1
Power Source (Phase, Voltage, Cycle)
ø Three
V 400
Hz 50
Input Power
Condition
(Ambient/Water)
A35W7 A7W35 A2W35
kW Cooling: 2.21 Heating: 1.86 Heating: 2.51
Maximum Input Power For Heatpump System kW 6.85
Power Supply 1 : Phase (Ø) / Max. Current (A) / Max. Input Power (W) 3Ø / 14.7 / 9.85k
Power Supply 2 : Phase (Ø) / Max. Current (A) / Max. Input Power (W) 1Ø / 13.0 / 3.00k
Power Supply 3 : Phase (Ø) / Max. Current (A) / Max. Input Power (W) — / — / —
Starting Current A 3.4
Running Current
Condition
(Ambient/Water)
A35W7 A7W35 A2W35
A Cooling: 3.4 Heating: 2.8 Heating: 3.8
Maximum Current For Heatpump System A 10.4
Power Factor
Power factor means total figure of compressor and
outdoor fan motor.
%
Cooling: 96
Heating: 95
Power Cord
Number of core —
Length m (ft) —
Thermostat Electronic Control
Protection Device Electronic Control