100
22
Heat
23
24
25
Heater ON/OFF O/D temp for heater ON setup
T of target temperature for Heater ON
T of target temperature for Heater OFF
26 (Display only if Cool exist, or else skip)
Cool
27
28
Auto
(Heat to Cool)
Heat
29
(Cool to Heat)
Cool
30
Tank
31
32
33
34
35
Pump down Pump down ON / OFF
36
Dry concrete ON (Dry concrete)
37
Contact 1
Contact 2
Operation setup Water temp. for heating ON
Outdoor temp. for heating OFF
T for heating ON
Compensation curve
Direct
Heating OFF Temp. setup
Compensation
curve setup
Direct temp. setup
T for heating setup
Heater ON Delay Time
Cooling model only
Water temp. for cooling ON
T for Cooling ON
Compensation curve
Compensation
curve setup
Direct Direct temp. setup
T for cooling setup
Cooling model only
Outdoor temp. for
Cool change temp. setup
Only when the
selection for Tank
is Yes
Outdoor temp. for
Heat change temp. setup
Floor operation time (max.) Max. operation time for Heat & Cool mode setup
Tank heat up time (max.) Max. operation time for Tank mode setup
Tank re-heat temp. Tank re-heat temp. setup
Sterilization Sterilization day and temp. and time setup
Service setup Pump maximum speed
Pump maximum speed setup Air purge
Service contact
Edit (Dry concrete schedule) Day and temp. setup
Name and Tel No. setup
Name and Tel No. setup