17
2
Previously run the cables from the wall or ceiling through the cable access hole.
3 Mount the attachment plate onto the mount bracket (mounting base).
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
Attachment plate
Note:
• For wall mounting:
Installation shall be performed in such a manner that "
TOP" of the attachment plate faces
upward. (Except for the case of connecting the conduit from the top. (+ page 18))
• For ceiling mounting:
The front side (model number indication face) of the camera shall be aligned in the direction of
the arrow in "
FRONT" on the attachment plate.
• Ensure that any one of the arrows on the mount bracket is aligned with the arrow of "
TOP" on
the attachment plate.
To Next Page
Loading...
