To Next PageTo Next PageWhat to do if the Panasonic WV-CW504S power cord is damaged?
If the power cord or connector of your Panasonic Security Camera is damaged, immediately turn off the power and request a repair from your dealer.
General| Maximum resolution | 976 x 494 pixels |
|---|---|
| Number of TV lines | 650 |
| Supported video modes | - |
| Analog signal format system | NTSC, PAL |
| Pan range | -170 - 170 ° |
| White balance | Auto |
| Tilt angle range | -75 - 75 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/10000 s |
| Minimum illumination | 0.0003 lx |
| Sensor type | CCD |
| Optical sensor size | 1/3 \ |
| Digital zoom | 2 x |
| Optical zoom | - x |
| Normal focusing range | 1.2 m |
| Video motion detection | Yes |
| Built-in HDD | No |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| International Protection (IP) code | IP66 |
| Interface | BNC |
| Signal-to-Noise Ratio (SNR) | 52 dB |
| DC output voltage | +12V |
| Power consumption | 280 mA |
| AC input frequency | 60 Hz |
| Power consumption (typical) | 3.4 W |
| Cables included | BNC, RCA |
| Storage temperature (T-T) | -30 - 50 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Depth | 164 mm |
|---|---|
| Width | 191.5 mm |
| Height | 146 mm |
| Weight | 1700 g |
Details the camera's user manual set, including operating instructions and installation guide.
Lists trademarks and registered trademarks associated with the product and software.
Provides a comprehensive list of all available setup menu items with their descriptions and reference pages.
Explains how to register and save camera settings patterns for different scenarios like day and night.
Configures the SUPER-D5 function for enhanced dynamic range in high-contrast scenes.
Selects the synchronization method for the camera, such as internal or power supply synchronization.
Adjusts the phase for power supply synchronization (LL) using an oscilloscope for optimal stability.
Adjusts the color density of the camera image, making colors deeper or lighter.
Adjusts image quality, making the image sharper or softer by controlling aperture.
Adjusts the image brightness level, making the image brighter or darker.
Adjusts the color phase (hue) of the camera image for accurate color representation.
