17
■ Presetting
● Preset Menu Display
1. Displaying the preset menu directly
(1) Move the cursor to PRESET 1 O and select the position num-
ber by moving the joystick to the right or left.
(2) Press the CAM (SET) key.
The preset setting menu appears on the monitor screen.
2. Displaying the preset menu from the PRESET NUMBER SET menu
(1) Move the cursor to MAP O and press the CAM (SET) key.
The PRESET NUMBER SET menu appears on the monitor
screen.
(2) Move the cursor to the position number to be set and press
the CAM (SET) key.
The preset setting menu appears on the monitor screen. To
display position number 33-64, move the cursor to “33-64” in
the lower left of the screen and press the CAM (SET) key.
Notes:
• The * mark indicates that the position number has been pre-
set.
• The character H refers to the home position.
• The second line from the bottom shows the preset ID corre-
sponding to the selected number. “DOOR” next to “ID” in the
example shown right is for preset position number 1.
• Preset numbers 1 to 4 are linked to alarm inputs 1 to 4. If
alarm input 1 comes in, the camera turns to preset position 1,
or to other positions according to alarm input 2, 3 or 4.
● Position Setting (POSITION SET)
1. Move the cursor to POSITION SET on the preset setting menu and
press the CAM (SET) key.
The position setting menu appears.
2. To Set Panning/Tilting Positions
(1) For PAN/TILT, move the cursor to PUSH SET and press the
CAM (SET) key. The PAN/TILT setting menu appears.
(2) Select panning/tilting positions by using the joystick, and
press the CAM (SET) key.
The positions are set and the screen returns to the position
setting menu.
To Next Page
Loading...
