42
(2) Automatic White Balance Control Mode (AWC)
1. Display SET UP MENU on the monitor screen by referring to page
16.
2. Move the cursor to WHITE BAL and select AWC → PUSH SW by
using the joystick.
3. Press the CAM (SET) key to start the white balance setup. PUSH
SW is highlighted to indicate that white balance is being set.
4. PUSH SW returns to normal when balance setting is completed.
5. For fine adjustment of the AWC, move the cursor to AWC and
press the CAM (SET) key. The AWC fine adjustment menu
appears on the monitor screen.
6. Move the cursor to R.
Obtain the optimum red gain by moving the joystick to the right or
left.
7. Move the cursor to B.
Obtain the optimum blue gain by moving the joy-
stick to the right or left.
8. Move the cursor to RET by using the joystick and
press the CAM (SET) key to return to the SET UP
menu.
To Next Page
Loading...
