To Next PageTo Next Page
Need help?Do you have a question about the Pandora Smart and is the answer not in the manual?
General| Remote Engine Start | Yes |
|---|---|
| GPS Tracking | Yes |
| Immobilizer | Yes |
| Anti-Hijack | Yes |
| Smartphone Control | Yes |
| Two-Way Communication | Yes |
| System Type | Car Alarm |
| Mobile App | Yes |
| Keyless Entry | Yes |
| GSM | Yes |
| Alarm Notifications | Yes |
| Sensors | Shock, Motion, Tilt |
| Alarm | Yes |
| Battery Backup | Yes |
| Compatibility | Most vehicles |
Essential safety and operational instructions before system installation and use.
Information on the owner's card containing secret PIN, login, and pass for online services.
Explanation of arming, warning, and alarm modes, including sensor triggers.
List of monitored zones and statuses, including interior, engine, and outside temperatures.
Details on initiating remote and automatic engine starts for convenience and comfort.
Enabling arming/disarming using the original vehicle control or keyless entry system.
How authorization devices like radio tags and phones are used for system control.
Procedure to verify the count of paired radio tags and mobile devices.
Automatic arming/disarming based on proximity to the vehicle.
Engine blocking when no authorization device is detected.
Functions to prevent vehicle seizure by detecting authorization device presence.
Procedure to enable or disable service mode via phone commands.
Accessing voice prompts for system control commands over the phone.
Replaying the last system message during a phone call.
Commands to arm and disarm the system remotely via phone.
Steps to create an account for the online service and mobile application.
Instructions to enter the system's programming mode using the VALET button.
Procedure to access the mobile phone pairing level.
Steps to connect the mobile phone to the system via Bluetooth.
How to exit the programming mode after configuration.
Methods to arm the security system, including by radio tag, phone, and app.
Methods to disarm the security system, including by radio tag, phone, and app.
Arming/disarming using original vehicle controls for intelligent access systems.
Using phone commands to arm or disarm the system.
Arming/disarming the system via the PANDORA-ON.COM website.
Arming/disarming the system using the Pandora Connect mobile application.
Lock/unlock doors using the mobile app when the ignition is on.
Automatic door locking/unlocking based on ignition or vehicle movement.
Activating PANIC mode via the mobile application.
Starting and stopping the engine using the car's original key.
Initiating remote engine start and prolonging operation via phone commands.
Starting and stopping the engine through the PANDORA-ON.COM website.
Starting and stopping the engine using the Pandora Connect mobile application.
Leaving the car with the engine running without the ignition key.
Putting the system into service mode for maintenance.
Procedure for entering the PIN-code for emergency functions.
Temporarily deactivating Immobilizer or Code immobilizer functions.
Activating/deactivating Immobilizer/Code Immobilizer using emergency control.
Description of the two-way remote control for system operation and status.
Description of the one-way radio tag for system control and authorization.
Wireless sensor for monitoring internal/external perimeter states.
Module for controlling engine compartment equipment and statuses.
Wireless device for sound indication and engine compartment control.
Device for performing engine blocking based on car movement.
