Need help?Do you have a question about the Pandora Light Pro and is the answer not in the manual?
General| GPS Tracking | Yes |
|---|---|
| Battery Backup | Yes |
| Remote Engine Start | Yes |
| Keyless Entry | Yes |
| Alarm Control via Regular Key | No |
| CAN Interface | Yes |
| Tilt Sensor | Yes |
| Type | Car Alarm |
| Connectivity | Bluetooth |
| Remote Control | Yes |
| Mobile App | Yes |
| Shock Sensor | Yes |
| Engine Immobilizer | Yes |
| Panic Button | Yes |
| GSM Interface | Yes |
| Range | Up to 2000 meters |
| Smartphone Control | Yes |
| Microphone | Yes |
| Compatibility | 12V vehicles |
Details the premium car service-security system features and capabilities.
Advises professional installation and highlights dependence on competent installers.
Provides a comprehensive table of remote button functions based on ignition status.
Step-by-step guide on how to arm the Pandora LIGHT PRO system.
Step-by-step guide on how to disarm the Pandora LIGHT PRO system.
Explains how to control the system in emergencies using a secret PIN-code.
Describes the process for enabling or disabling an immobilizer radio tag.
Details how to activate PANIC mode to draw attention in emergencies.
Introduces the system's capabilities for starting the engine remotely or automatically.
Outlines the necessary steps for manual transmission cars before remote engine start.
Step-by-step guide on initiating a remote engine start command.
Enabling or disabling the Anti-Hi-Jack mode.
Setting up modes for automatic engine start and stop.
Navigating the remote start settings for time and temperature.
Procedure for adjusting shock sensor sensitivity and levels.
Detailed description of the base unit's wiring harness connections and CAN bus interface.
Diagram illustrating the connections for the Pandora Relay module RMD-5M.
How to activate and deactivate maintenance/valet mode for servicing or parking.
Procedure for arming and disarming the system using the radio tag.
Enabling and disabling automatic arming/disarming based on tag proximity.
Details on enabling and the engine blocking behavior of the immobilizer mode.
How the anti-hijack mode prevents aggressive car seizure using delayed engine blocking.
Using original car buttons to enter a code for immobilizer functions.
How to start, connect, and use the application for system control.
Methods to enter programming mode using a computer or VALET button.
Procedure for entering the PIN code to access programming levels.
Instructions for updating the system's firmware using AlarmStudio or quick boot mode.
Overview of programming levels accessible via the VALET button.
Procedure for recording remote controls and radio tags into the system's memory.
Detailed steps for recording remote controls onto the system.
Detailed steps for recording radio tags onto the system.
Procedure to change the factory preset service PIN code.
Restoring the system to its default factory settings.
Programming and configuring the immobilizer code.
Selecting buttons for entering the immobilizer code via digital or analog input.
Entering the PIN code for immobilizer deactivation.
Confirming the entered immobilizer PIN code for saving.
To Next Page
