To Next PageTo Next Page
Need help?Do you have a question about the Pandora Light and is the answer not in the manual?
General| System Type | Car Alarm |
|---|---|
| Operating Frequency | 433 MHz |
| Remote Control | Yes |
| Bluetooth | Yes |
| CAN Bus Interface | Yes |
| Immobilizer | Yes |
| Anti-Hijack | Yes |
| Shock Sensor | Yes |
| Tilt Sensor | Yes |
| Smartphone Control | Yes |
| Glass Break Sensor | No |
| Voltage Monitoring | Yes |
| Temperature Monitoring | Yes |
| Mobile App | Yes |
| Range | Up to 1 km |
Adjust sensitivity and levels for shock, motion, and tilt sensors.
Configure siren sounds and remote notification types.
Manage valet mode, system time, and alarm clock.
Information on the anti-hi-jack security feature.
Steps to enter and exit system programming.
How to program settings and update firmware via computer.
Manual programming of settings using the VALET button.
Methods for controlling the system in emergencies via PIN-code.
Specific functions and indicators of the two-way remote control.
Key functionalities and hardware specifications of the base unit.
Lists all components included in the Pandora Light system package.
Lists all protected security zones monitored by the system.
Explains the meaning of different LED indicator colors and patterns.
Details short and long press functions of remote buttons.
Visual guide to icons displayed on the remote control.
Step-by-step guide to arming the security system.
Step-by-step guide to disarm the security system.
How to unlock the car trunk using the remote.
Automatic door locking/unlocking based on ignition status.
How to locate the car in a parking lot using the system.
Procedure for arming the system with a delay.
How to activate the panic mode for attracting attention.
Features and conditions for remote and automatic engine starting.
Enabling engine start for manual transmission cars via reservation mode.
Detailed instructions for initiating and stopping remote engine start.
How to control the engine preheater via the menu.
Viewing car status and event history.
Managing timer channels for additional functions.
Configuring remote and automatic engine start options.
Adjusting sensitivity of various sensors.
How to activate and use Valet mode.
Configuring siren sound patterns.
Setting the system time and alarm clock.
Information on the anti-hi-jack security feature.
Detailed explanation of the engine preheater function.
How to use and configure timer channels.
How to check vehicle status indicators like temperature and voltage.
How to view a log of system events.
Setting up and operating automatic engine start modes.
Pinout and function of the main X4 socket wires.
Pinout and function of wires in the X5 relay module socket.
Wiring diagram and specifications for the RMD-5M relay module.
Description of wires and functions for the X7 multifunctional channel socket.
How to adjust shock sensor sensitivity and levels.
How to adjust motion sensor sensitivity.
How to adjust tilt sensor sensitivity.
How to configure siren sound outputs.
How to enable or disable sound notifications on the remote.
Options for notifying connection loss.
Instructions for using service and valet modes.
How to set the system time.
How to enable or disable the alarm clock.
Step-by-step guide to replace the remote control battery.
How to enter the secret PIN-code to disarm or control the system.
Steps to enter the system's programming mode using PIN-codes.
How to exit the programming mode and save changes.
Steps required to program the system via a computer.
Process for updating the system's firmware.
How to program system settings using the VALET button.
Procedure for recording new remote controls.
How to change the default service PIN-code.
Recording engine idle speed for turbo timer function.
Restoring the system to its default factory settings.
Setting up the PIN-code for the immobilizer function.
Calibrating the fuel level sensor.
Procedure for programming the bypass of the original immobilizer.
Explains the meaning of different siren and turn light signals.
Explains the meaning of LED indicator colors.
How to check the number of paired remote controls.
Diagram showing the placement of system modules within the vehicle.
Details regarding warranty terms, conditions, and exclusions.
Guidelines for product transportation and storage.
Form for documenting the system installation.
Certificate confirming product conformity and acceptance.
Card for recording purchase date and seller information.
