21
User manual
Automatic engine start
The system allows setting up modes of automatic engine start and stop. Synchronized real-time clock
on the remote and base unit and other autonomous system settings allow many engine start options
without needing to have the remote in command radio range.
Automatic start and engine work conditions programming is done using LCD remote. Shortly
press
button to enter «REMOTE START SETTINGS» menu. Shortly press button to switch
between menu sublevels. Sub-level values are changed using
and buttons.
When changing settings are done, the values should be saved. To do this, proceed to Send settings
sublevel by pressing of
button and press button to save new settings. Changes will be sent
to the base unit, it will be confirmed with double sound signal of the remote.
To exit menu, press and hold
button for 1 second.
NOTE: If you have not saved new settings, remote and automatic engine start settings will
remain the same as before.
NOTE: Engine start via temperature is available only if temperature sensor is connected.
The sensor availability depends on the system set.
WARNING! Enable remote start if your local legislations allows driverless cars to have
working engine.
To Next Page
Loading...
Need help?
General
