3
User manual
Sensor settings 30
Shock sensor settings 30
Motion sensor settings 32
Tilt sensor settings 32
Siren signal settings 33
Sound notification settings 33
Radio channel control settings 34
Service/Valet mode 35
Time settings 35
Alarm clock settings 36
Replacing a battery in the remote control 36
Control over the system in case of emergency 37
Programming the system 39
Entering the programming mode 39
Exiting the programming mode 39
Preparing to program the system using a computer 40
Updating firmware 40
Programming using the VALET button 40
Additional information 46
Siren sound and light signalization 46
Meaning of the LED indicator signals 46
Checking the number of recorded remote controls 47
System modules layout 48
Warranty obligations 49
Installation certificate 50
Acceptance certificate 51
Warranty card 51
To Next Page
Loading...
